How Do I Fix Epson WF-3640 Printer Error Code 0x97?

Epson is a top printer brand that does not require introduction. From making printers outfitted with all the required features for a low price to offering user-friendly features that don’t require technical knowledge, Epson finds its place among the leading printer brands. No doubt. Epson is an amazing printer however it can have some issues. A common issue that afflicts Epson customers can be Epson Printer epson error code 0x97.

If you’ve encountered or are experiencing the Epson error message 0397and need efficient solutions, this blog is perfect for you. This blog will address the issue in greater detail and offer solutions to take action from the convenience of your home to fix this issue.

What is the Error Code 0x97 on the Epson Printer?

This Epson Printer Error code 0x97is an problem that occurs when users are using the Epson printers for an extended period of time. The issue could pop up at any time without prior indications and can hinder the printing process.

The error message appears on the LCD screen of the printer. The issue must be addressed immediately for normal operation to resume.

Connect the printer:

1. To correct the issue, it is necessary to cancel all printing jobs, and then eliminate any paper jams.
2. Remove all cords and cables from your printer, as well as anything connected to it following this.
3. To eliminate any electricity left from your printer, it is necessary push to power off the printer.
4. Keep the printer in place for 60 seconds, then after you have connected your printer.
5. Print a document following the switch on of your printer to verify that the error has been fixed.
6. Switch the printer on as well as Off
7. Unplug all the wires and connectors and then wait 5 minutes until the printer cools down.
8. Press on the power button and keep it for 60 seconds, while connecting all wires.
9. Keep holding on to the power button another 60 seconds, before taking it off.
10. Print one test page to confirm that the issue is resolved.

Clean the printer head:

Shut off the printer, then open the cartridge ink box to clean the head of the printer.
The cartridges for ink should be removed and released.
Put a damp cloth over the middle track. That’s the place where the printer’s head is. The cloth should remain for a while to soak up all the dried ink.
Install the cartridges again after drying the print head using an absorbent cloth.
Last but not least, conduct the test of printing to determine whether the issue is fixed.

Did you follow the steps mentioned above, but you are still struggling with the Epson error code 0x97 of the printer? If yes, then you don’t need to worry. Contact us at the Epson Customer Support numberand speak to an expert who will fix your issue right away.