What is Epson Error Code 0x97 And How To Fix This?

If you’re operating one of the Epson printers, you’ll likely encounter an error, and the title of it is Epson Error code 0x97. The error is caused when the printer’s internals are experiencing an issue.

In the course of printing, the error usually occurs and the printer ceases to print.

Solutions to Resolve Epson Printer Error Code 0x97:

To fix this error For redressing this error, here are some options:

1.) Disconnect your Epson printer, then plug it in:

Follow the steps in this article for this process:

In the beginning, first, open the printer, and confirm whether every document isn’t stuck. If the document is jammed and you are unable to remove it, then take care to remove the stuck document.

• Remove from the printer all cartridges.
• Unplug the printer and all USB cables and power cords.
• You must press the power button of your Epson printer after unplugging the printer.
• Connect all of the USB cables as well as the power cord on the printer within a couple of minutes.
• Begin by using your Epson printer right now.

If you find that the Epson Error code is 0x97, and it persists or does not, you can try other solutions If it is still a problem.

2.) Unplug the device and plug in your printer using the reverse manner:

Follow the steps in this article for this process:

• The first step is to turn your printer off.
• Unplug the printer’s cables.

Now, you must hold the power button on for at least one minute before you press it for at least 1 minute.

• Then, plug in the printer’s cables once more.
• Then, hold and push the power button once more for 60 minutes.

Then, determine whether the error message persists.

3) Wet tissue is used for cleaning pads mechanically:

Follow the steps below to follow this procedure:

• Then shut off the printer and then cut the wires even the power supply, out of the printer.
• Then, you need to remove the case from the printer.
• A tissue is now to be taken and then dipped into warm water.
• Then, turn the printer’s head towards the middle.
• The tissue should be placed on the head of the mechanical pad following this.
• It is imperative to return the head to its position for about 10 minutes right now.
• The printer must be cut paper after around 10 minutes, then remove the casing of the printer.
• Switch on your printer now.

To fix your Epson Error code (0x97) To resolve the Epson Error Code 0x97, you should complete this step two or three times.

4.) Install a patch to this fix

An Epson repair patch for 0x97 could be downloaded for Epson customers to fix the bug 0x97. In order to download the patch to fix repairs, please follow these instructions following:

• To begin, visit the official 0x97 repair patch website.
• Get the file to install the update 0x97. Its size is 1 MB. driver’s files are 1 MB.
• Click” Scan Now” following the download.
• Click on Patch after which click on Patch.

All the processes above will eliminate this Epson error 0x97.